|
 Anti-Scuff Paste/Spray
For the assembly of moving parts. Provides
initial lubrication during running-
in. Used for the pre-treatment of
open gears when these are switched to
using specialized open gear lubricants.
Packaging:
Anti-Scuff Paste 700gm can;
Anti-Scuff Spray 300ml aerosol |
|
Copper Gasket Sealer
It is a non-hardening adhesive
with a high copper
content to promote heat
transfer. Use in place of adhesive-
type products. Allow
gaskets to be re-used.
Packaging:
400ml aerosol |
|
Copper Anti-Seize Compound
A high grade anti-seize for use on all
types of threaded connections. Also
used on the backs of disc pads to
prevent chatter/squeal. Meets MILA-
907E. Temperature up to 1,100°C.
Packaging:
400ml aerosol; 500gm brush top can;
5kgs & 15kgs pail. |
|
Chrome Anti-Seize Compound
A highest grade anti-seize compound
for use where our copper and
nickel compound are not effective
or desirable. Takes temperatures
up to 1500ºC. Meets MIL-A-907E.
Product is environmentally friendly.
Packaging:
400ml aerosol; 500gm brush top can;
5kgs & 15kgs pail. |
|
Flaw and Crack Detector
A three part kit for checking the soundness of
important welds and seams. Pack 1 is the cleaner,
pack 2 is the penetrant and pack 3 is the developer.
Also locates aws and crack in allmetal
surfaces.Manufactured to complywithMilitary
speci cations DTD 929 and MIL-I-25135E
groups 1 & 2.Can be used on all metals including
titanium, nickel, stainless steel and aluminium.
Meets NDT tests ofWelding Institute.
Packaging:
Flaw & Crack No. 1 Cleaner 350ml aerosol
Flaw & Crack No. 2 Penetrant 300ml aerosol
Flaw & Crack No. 3 Developer 350ml aerosol |
|
 Food Grade Anti-Seize
Food Grade Anti-Seize prevents seizing,
galling, friction, and wear on threaded
joints and other metal-to-metal surfaces.
NSF Rated H1 for use as a lubricant with
incidental food contact in and around food
processing areas.
Packaging:
8oz brush top poly. |
|
Hi-Spot Blue
A blue coloured locator of
Hi-spots or contact areas
on gear, valve seats, bearings
and other critical areas
during manufacture or
re-assembly procedures.
Packaging:
300ml aerosol. |
|
Leak Detection Spray
Enables you to nd, without effort, any leaking spots of
screwed and anged joints, conduits andwelds under internal
pressure. It is non-toxic & does not form harmful
compounds with gases, such as carbon dioxide (CO2),
propane, butane, acetylene, compressed air, town and
natural gas, nitrogen or uorinated hydrocarbons.
Packaging: 400ml aero. |
|
Mechanic Blue
A dark blue paste used for locating high spots on
bearings and shafts. High spots will be shown as
bright streaks when the shaft is lifted to the bearing.
Packaging:
30gm tube |
|
Nickel Anti-Seize Compound
An anti-seize compound used where galvanitic
corrosion occurs namely for stainless steel applications.
For the assembly of all threaded connections
subject to high temperatures. Takes
temperatures up to 1425ºC.MeetsMIL-A-907E.
Packaging:
400ml aerosol; 500gm brush top can; 5kgs pail & 15kgs pail. |
|
 TPS Pipe Thread Compound
A pipe thread compounds used to prevent galling & leakages for casing, tubing and line pipes
in various deep oil-gas well drilling environments
in high-temperature and high-pressure
valve and valve stem and other industrial devices.
Excellent resistance in salt water, acid & alkaline,
excellent corrosion caused by sour
gas (H2S) and salt water and does not harden,
Temperature range -40°C to 600°C.
Packaging:
1 lbs tin can; 35 lbs poly pail. |
