Form Oil (Concrete Mould Release)

A concentrated water soluble mould oil suitable for use with wooden as well as steel moulds as release agent for concrete and brick. The basic function of Form Oil is to prevent the adhesion of wet brick or concrete to the mould and thus facilitate the removal of the brick or concrete from its
mould. As the brick or the concrete is easily removed, thus its surface will be maintained.

Form Oil will not affect the curing of the brick or concrete and thus will not affect its strength.

Packaging: 1 Liter, 4 Liters & 20 Liters

Silicone Oil

A water clear silicone fluid that is nontoxic, odourless and has an excellent water repellency and low surface tension. Use as a mould release agent for rubber, plastics and metal die-castings. Safe for rubber or plastics. Excellent hydraulic for damping uid. Use in print shop to prevent set off, to eliminate static adhesion and to avoid smudging. As a water repellent treatment: of powders (for paints and plastics), of bres: (glass bres). As Surfactants for styrene-butadiene foam. Available in various viscosity.

Packaging: 1 Liter, 4 Liters & 20 Liters

Silicone Spray

A very high quality silicone based lubricant spray for use on all rubber, plastic and wooden surfaces. A very safe non-toxic, non-staining protective lubricant ideal for bumpers, tyres, exhaust bracket rubbers, vinyl tops and all other rubber components.

Packaging: 400ml aerosol

Spatter Release #639 (Non-Silicone)

A water-based non-silicone spatter release. For easy removal of weld spatter. Will keep welding nozzles clean.

Packaging: 400ml aerosol.

Spatter Release #640 (Non-Silicone)

A non-silicone spatter release that prevents adherence of weld spatter around the weld zone and in the nozzle of CO2 gas shrouded welding guns. Allows subsequent cleaning and painting.

Packaging: 400ml aerosol.