Spanjaard Chain & Linkage Spray

A lubricant containing a soluble form of molybdenum that penetrates like oil, lubricates like grease and does not stain. For use on all chains, linkages and cable. It is not subject to fling off and remains on working surfaces to give a long-lasting lubrication under the most demanding conditions. Its dry nature prevents excessive dust build-up.

Spanjaard Chain Lubricants 726A

A non-black synthetic high temperature oil for industrial high temperature oven chains and Stenter chains in the textile industry. Effective up to 500ºC. Leaves no residue and will remove carbon deposits in cases where mineral oils were previously used. This product contains soluble molybdenum.

Spanjaard Chain Oil 718

A mineral oil-based medium viscosity chain lubricant containing M0S2 for general application where the use of the more expensive 726A or DHT chain lubricants is not justified. Suitable up to 180ºC.

Spanjaard Liquid Grease

Available in aerosol only. Contains MoS2 and other EP additives giving minimum fling-off and high water resistance. Penetrates like oil and lubricates like grease. Suitable for use on standard and "O"-type chains. Use Chain & Linkage Spray when non-black product is required.

Spanjaard Wire Rope Dressing LQG-X

LQG-X - Liquid consistency. No heat or solvents required for application. Maximum resistance to lubricant fling-off and water wash-out.