Rock Oil Air Line Oil

Rock Air Line Oil will not only remove the finest dust particles but it is also highly resistant to emulsification in the cold, wet conditions in the air line lubricators, thus aiding the drawing of the water out of the air system. This provides fresh, dry air for the efficient use of the air tools, and equipment.

Rock Oil have use the finest virgin base oils to produce an oil that gives excellent air flow characteristics while aiding with filtration.

Rock Air Line Oil is specifically designed for use in dash pot air line lubricators, but may also be used as a tool lubricant and general all - purpose oil for around the factory or workshop.

Rock Air Tool Oil

Rock Air Tool Oil has been specifically designed and formulated for use with all piston and rotary type air tools. The special sulphurised fatty ester additives give a lubricant with minimum sulphur corrosivity together with maximum lubricating value and load carrying capacity. It is eminently suitable for both ferrous and non-ferrous metals. It both lubricates, cleans and protects the air tool to which it is applied. Tool life may be dramatically extended by the removal of gum deposits by Rock Air Tool Oil, and improved power and speed is also provided.

Rock Air Tool Oil Benefits such as Provides improved air tool performance, Lubricates, cleans and protects, Removes gummy deposits, Stops and inhibits rust, Extends air tool life.

Some major Applications such as : Impact wrenches, Tampers, Paving breakers, Ratchet wrenches, Hammers, Air pullers, Polishers, Drills, Screwdrivers, Needle scalers, Chisels, Grinders.

Rock Oil Synthetic Compressor Oil ( 32, 46, 68, 100 ,150)

A fully synthetic compressor oil formulated from synthetic hydrocarbon fluids (polyalpha olefins) and the latest additive technology. The blend is re-inforced with esters to give a greater lubricity and lower friction compared to synthetics formulated purely from PAOs.

It offers extended oil life thereby reducing servicing and extended down-time, excellent wear protection, good compatibility with seals and paints and reduced air separator blocking.

It also possesses excellent viscosity temperature characteristics, being formulated to provide the correct viscosity at the temperature of operation. At low temperatures they are less viscous than conventional fluids, providing easier start-up and reduced energy consumption. At high temperatures they are more viscous than conventional fluids, providing greater lubrication. It also has excellent water – and air-separation, thereby reducing contamination, and has a low carbon-forming tendency.

Cylinder Oil

Steam cylinder are lubricated by introducing the lubricant into the steam line. This can be done either by using an atomiser, or by direct feed into very high temperature steam. Atomised oil mist is the carried by the steam to the point of lubrication, forming an oil film which reduces friction, and hence wear. The oil also prevents the leakage of steam past valves, pistons, etc.

Rock Oil 75w90 Synthetic Gear Oil GL5 (75w/90, 85w/140)

Rock Oils Gear Oils GL5 are highly sophisticated EP transmission fluids fortified with synthetic base stocks. Rock Oils Gear oils offer superb anti-wear and load carrying properties compared to conventional mineral based gear oils. Rock Oils Gear oils have been developed to give maximum lubrication under high temperature and high speed conditions whilst contending with the problem of low temperature gear shift difficulties experienced with modern 5 speed transmissions thus reducing wear and preventing failure.